JOHNSTON ATOLL F &S NO. 01084 USER TC/LRL FUNDING AGENCY SCIENTIFIC TITLE SOSR Rocket Assembly and Checkout Bui.dings - Subtask A941 STRUCTURE /FACILITY NO. SCIENTIFIC STATION NO. 888 ($000) ENGR JTF-8 MILCON CRO7-64| CRO7-65 PRE-GO Prior Cost POST-GO Est. 3/65 SUBTOTAL AEC PRE-GO FY 69 FY 70 SUBTOTAL TOTAL None PROC CONST Bo FOD GO+150 TOTAL FURN 25.9 45.0 244.5 315.4 25.9 45.0 244.5 315.4 * 70.0 105.0 95.0 105.0 : 25.0 25.0 50.9 45.0 3.0 3.0 3.0 PRIOR YEARS ENGINEERING Completed. Drawings: 91-884-Cl1 91-888-Al thru A5 91-888-S1 thru S5 91-888-M1 thru M6 PROCUREMENT 91-888-E1 thru E3 91-888-W1 thru W3 91-030-W22 Completed. CONSTRUCTION This facility is a 60 x 100-ft. structural steel building with corrugated asbestos cement siding, a built-up roof and a reinforced concrete floor designed to support 100 psi. The interior walls of the building are insulated and covered with gypsum board. The main portion of the building is the assembly and checkout area which consists of an adjoining high bay area and a low bay area. (Completed in 1967.) The high bay area is 40 x 40 x 45-ft. high. A caged ladder extending from ground level to the roof on the exterior of the building and a catwalk on the roof provide access to 5-ton capacity moment of inertia suspension points. A monorail installed the full width of the high bay area is equipped with a 5- ton hoist having a 40-ft. maximum hook height. A 16-ft. wide x 12-ft. high biparting sliding door provides access to the high bay area from the outside. An 18 x 18-ft. concrete ramp is provided on the exterior side of this door. *Procurement and Construction Funds 1-73 ; SSSR VOL I April 1969