ce. Anchors: Work shall be secured to building construction with anchor bolts, bent plates, as indicated or required. or angles ad. Hardware: Contractor shall furnish and install all hardware shown or required for proper opera- tion, including hinges, pulls, shelf supports, and brackets, catches, etc., of types hereinafter specified. 8-09. COUNTERS AND BENCH TOPS: Tops for counters, benches or similar items shall be of the materials shown, and except where otherwise noted, shall conform to the following standards: &. Linoleum shall conform to Federal Specification LLL-L-367, for Jaspe type, standard grade; color gray or as selected. Linoleum paste shall conform to Federal Specification 0-P-106, except that paste shall be waterproof. Standard weight linoleum lining felt shall first be cemented to the top, linoleum shall then be cemented to the felt and joints and edges weighted with sand sacks until paste has set. b. Hardboard, where called for on the drawings, shall be hard-pressed, structural fiber-board, of the thicknesses shown, and shall be in accordance with Federal Specification No. LLL-F-311, for Class B. Material shall be bedded in waterproof paste and shall be applied to the wooden sub-surfaces under pressure. c. Asbestos-cement Board backing for metal tops shall be of the thicknesses shown and shall com- ply with Federal Specification No. SS-S-283 for Type I sheets, Sheets shall be securely nailed to bench tops and back rails before application of metal sur- facing. d. Plastic Tops and back rails where called for shall be mill fabricated of plywood with a glazed surface of the weight called for. Unless otherwise shown, plywood backing shall be 3/4 inch thick, with face veneer of V. G. Douglas Fir, birch or equal closegrained, non-resinous wood. 180-180 glaze shall consist 8-9