ic Subject: DieselEngines Plan Die T The procedure outlined below should be followed in obtaining information desired as outlined on Field Sketch No. 411. sketches No. 423, 430 & 435 as Reference Guide. 1. 2. Use Field Engine to be running full speed (720 RPM) and carrying full load, governor controlled. (a) Check governor speed with actual speed of engine before test. (b) Set overspeed trip at 792 RPM and check, Check governor on Full load & No load to get overspeed for droop characteristic. Check following temperatures: (a) Jacket water in and out - allowing less than 10 deg. (b) Lube O11 in and out - Normal 190 deg. F. (ce) Salt Water cooling in and out. Steam out of silencer Fresh water thru silencer Silencer exhaust gases in and out Stack gases to Atmos. 3. Check following pressures: (a) Steam out of silencer. (b) Salt water cooling systen Lube oil pump and header Fuel o11 pump and header Exhaust in and out of silencer Aux, Exhaust out of engine (g) -Aux, Exhaust out of engine th) fkux, Exhaust to Atmos (4) Air intake to engine 5-323