ends shall be pinked. Curtains shall be provided with ropes and pulleys for pull-up operation. 8-25. FINISH HARDWARE: a. General Requirements: Contractor shall furnish and install all hardware shown on the drawings, herein specified or required to complete the finish harcware installation for the project. Except where otherwise called for, all finish hardware shall, within the limits of practical availability, be of corrosion- resistant materials or of materials processed to resist corrosion. All hardware shall be accurately fitted, and with the exception of supporting hardware, all surface applied hardware shall be removed before the painter's finish is applied; and subsequent to completion of painting shall be replaced and left in good working condition. b. Hardware Elsewhere Specified: Certain finish hardware items, including hardware for the following installations, are specified under the section of specifications pertaining to those installations: c. l. Pre-fabricated metal buildings 2- Vault doors 3. Steel plate or other special doors 4, Window screens 5. Movable curtains and sliding panels Keying: All cylinder locks and padlocks shall be keyed, master keyed and grand master keyed in @ manner to be determined by the Contracting Officer. d. Hardware List: Except as otherwise noted, finish hardware shall conform to the following list: 1. Latch Sets: latch sets where called for on the drawings or required shall be "Parlyn" Door Latches as manufactured by Parlyn Ltd., los Angeles, California or approved equal; of the types indicated. Case and pulls shail be of aluminum; operating mechanism, except for bronze pins and chromium plated steel springs shall also be of aluminum. 8-17