to their designated contro] point amd obtain a fuel status report and altitude. When the TIGER elements reach the control point, inbound, they will be instructed to switch to C Channel and call DIRTY FACE, This will be position Five. Scope Controller #7: Will control one C-54 photo aircraft, call sign, PEWTER 1 and monitor two (2) WB~29 cloud trackers, call sign WILSON 2 and 3. He will report for duty fifteen (15) minutes prior to the scheduled arrival at position 2 for PEWTER 1 in Annex C (Aircraft Mission Chart). He will check scope #7 and VHF Channel A to insure they are functioning properly and have his teller check his communications with the Effects Status Clerk and his plotter, He will monitor VHF Channel A to receive a call from PEWTER 1 when approximately fifty (50) miles from ENIWETOK at the designated control point in Annex C (Aircraft H-Hour Position and Flight Patterns). When positive control is established with PEWTER 1, the teller will give the status clerk the time control is accepted and start three minute position reporting to the plotter. The controller will give PEWTER 1 range and bearing to assigned mission station. When PEWTER ] reaches mission station, position three will be reported tothe status clerk. Controller will place PEVTER 1 in a starboard race track pattern with approximately three (3) minute legs broadside to Ground Zero. The The cone troller will provide PEWTER 1 with range from Ground Zero each time he passes through his assigned true bearing from Ground Zero. The Controller will provide position reports and necessary vectors to insure PEWTER 1 meeting his H-Hour position within accepted tolerance of plus or minus fifteen (15) seconds. Inmediately after H-Hour, PEWTER 1 will fly at his own discretion to photograph cloud. The Controller will ccntinue to track PEWTER 1 and give him range and bearing to his assigned control point upon 2 3S completion of mission, Wha PEWTER 1 departs cloud area for control point, $ 3 the teller will give position four to the status clerk, The controller z& will maintain control until PEWTER 1 reaches the control point, inbound tog ENIWETOK and control is accepted by DIRTY FACE at w'ich time position Five & will be told tothe status clerk, Scope Controller #7 will have PEWTER 1 switch to Channel B for time hacks designated by blinking lights only. (Disregard solid light). Scope Controller #7 after releasing PINTER 1 at position 5 will standby to monitor WILSON 2 and 3 on VHF Channel "A", Position reporting procedures for WILSON 2 and 3 will be the same as for PEWTER 1, ‘They will report rad-safe information on VHF Channel "A" to of os, Me BOUNDARY TARE and to DIRTY FACE on Circuit J-411. The Controller will be prepared to copy rad-safe information in cade and pass to officer maintaining check list for disposition, S > TASK GROUP 7.4 OPRS ORDER NO, 5-54, ANNEX T, APamv 2 geS&S eo.” t S 3S