ao, JOHNSTON ATOLL F&S NO. SCIENTIFIC TITLE 01020 Nike-Hercules Rocket Assembly Building USER STRUCTURE FACILITY NO. TC FUNDING ($000) PRE-GO JTF-8 Subtask A942 SCIENTIFIC STATION NO. 886 AGENCY - BOD None ENGR Prior Cost PROC 23.0 CONST 125.3 FOD GO+60 TOTAL FURN 111.8 260.1 4.1 4.1 7.0 115.9 264.2 7.0 MILCON CRO7-64! POST-GO Estimate 3/67 TOTAL 23.0 125. 3 PRIOR YEARS ENGINEERING Drawings: Completed. 91-030-W24 91-097-SS1 91-884-Cl 91-886 Al thru A3 91-886-El thru E3 91-886-S1 thru S4 91-886-M1 thru M3 91-386-W1 thru W4 PROCUREMENT Completed. CONSTRUCTION The Rocket Assembly Building is a 40 x 60 x 19-ft. high prefabricated structure with a lean-to 12 x 60 x 10-ft. high on the west side. The building has a concrete floor and corrugated asbestos cement siding and roofing. The lean-to area contains a stock room, hydraulic shop, and latrine facilities. Workbenches are provided in the hydraulic shop and shelving is provided in the stock room. The main structure is the Assembly and Checkout Area. A 15-ft. high, 5-ton explosion proof traveling bridge crane has been installed in this area. Two sliding doors 12 x 15-ft. high at each end of the building provide access to the area. A screen room 17 x 57 x 12-ft. high has been installed in this area on the east side. The screen room provides shielding protection in accordance with H&N Specification No. H&N-PC-37 and as measured within the limits of the available RFI test equipment. All doors into the screen room are provided with ''No Entry'' warning lights and panic hardware. A separate unit provides humidity control and air conditioning to the screen room. All electrical outlets and lights in the building and screen room except the stock room and latrine are explosion proof. Exterior lighting is provided on all four sides of the building. Two TC -furnished motor generator sets pro- vide 400-cycle power to the screen room, the hydraulic shop and the Assembly and Checkout Area. 1-23 VOL I April 1969 tere . af he