eine. JOHNSTON ATOLL F &S NO. TITLE 01125 Sandia Electronic Laboratory USER STRUCTURE/FACILITY NO. SANDIA SCIENTIFIC SCIENTIFIC STATION NO. 693 ' None BOD FOD FUNDING AGENCY AEC ($000) PRE-GO Prior Cost TOTAL ENGR PROC CONST TOTAL 4.2 25.3 29.5 4.2 25.3 29.5 FURN COMPLETED DESCRIPTION Building 693 (completed in 1968) is a 20 x 40-ft. concrete block structure with a reinforced concrete floor and roof; ceiling height is 9-ft. 4-in. The interior of the building is separated into 3 areas by 6-ft. high partitions. The areas are a machine shop, electronics laboratory and parts storage area. Workbenches are provided on two sides of the electronics laboratory, and shelving is provided in the parts storage area. Sandia furnished machine ‘shop equipment is to be installed in the shop area. Two sets of double metal doors, 3 x 6-ft. 8-in. provide access to the shop area and the storage area. This building, replaced Sandia's requirements for Building 315. The building is air conditioned and dehumidified using existing equipment obtained from Building 315. The building is provided with 75 kva, 120/208 volt, 60 cycle, 3 phase, power. Overhead fluorescent lighting is provided in each area of the building. In addition to the duplex receptacles located in the shop and electronics laboratory, 240 volt, 15 amp, 3 phase circuit breakers have been installed in the shop area for connecting the machine shop equipment. DRAWINGS: 91-693-Cl 91-693-Ml 91-693-Al and A2 91-693-E1 91-693-S1 VOLI April 1969