SECTION 16 INTERIOR WIRING FOR LIGHT AND POWER GENERAL CONDITIONS: 16-01, REFERENCES: The following paragraphs of Section 15 of these specifications shall apply to this section: 15-01, 15-02, and 15-04. 16-02, THE INSTALLATION shall comply with the regulations of the 1947 National Electrical Code. 16-03. SCOPE: The work to be done under this section of these specifications shall include the furnishing of all materials, labor, equipment and tools required to complete and have ready for operation the installation of the following items in accordance with these specifications and the applicable drawings. 16-04, a, Wiring for light and power in buildings. b. Wiring for light and power in and on stations. ELECTRICAL CHARACTERISTICS of equipment shall be checked in the field. If necessary, make connections and reschedule panel wiring to suit in field. or conduit runs to suit conditions missible. Rerouting of cabl in the field will be per- 16-05. APPLICABLE SPECIFICATIONS: The following specifications and standards form a part of this specification: &. Federal Specifications: J-G-103 Cable and Wire; Rubber-~Insulated, Building-Type (0 to 5,000-volt service) W-B-616 Boxes and Outlet-Fittings, Floor W-F -406 Fittings; Cable and Conduit. W-L-121 Lamp Auxiliaries; Fluorescent. W-0-B06 (for) Rigid-Steel-Conduit and Electric-Metallic-Tubing (Steel) OBEaETaReTeAACoBoaesas Gekoasee: and Accessories (For Shore Use). 16-1