SECTION 13 METAL BUILDINGS 13-01. SCOPE OF WORK: The work covered by this section of the specifications includes the furnishing of all labor, materials, equipment and tools necessary for the complete installation of all metal buildings shown on the drawings. Metal buildings as stipulated in this section shall consist of all-aluminum buildings and steel-framed buildings with aluminum roofing and siding. 13-02. WORK NOT INCLUDED: The following items of work shall be as elsewhere called for in the specifications. a. Concrete foundations and floor slabs for metal buildings shall conform to the "Concrete and Form Work" section of these specifications. b. Interior partitions, doors and similar items not standard with the metal building manufacturers, are covered in the sections of these specifications pertinent to such items. c. Wood framed buildings with aluminum roofing and siding are included in the Work" section. 13-03. Carpentry and Related ALL-ALUMINUM BUILDINGS: a. General Requirements: Contractor shall furnish and erect aluminum buildings to the sizes and designs and in the locations shown on the drawings. At the direction of the Engineer, accessory structures (those adjacent to and whose function is closely related to a primary structure) may be relocated about the primary structure so as to meet field conditions. The various building parts shall be completely pre-fabricated and shall be standard products as manufactured by the Pacific Iron and Steel Company of Los Angeles, or approved equal. b. Drawings: The Contractor shall check and approve building manufacturer's shop drawings as provided in paragraph IV-la. of Part I, General Conditions. Manufacturer's approved drawings shall include erection diagrams showing methods of assembly and procedure in erecting the buildings, as well as details of parts and assemblies. The contract drawings accompanying these 13-1