CHAPTER ltl, SECTION 3 STATIONS: 3240.01 through .03 CONSTRUCTION: 3-17-58/4-10-58 SITE: Nan, Peter, Uncle USER: SC The launching facility consisted of an 8x14foot concrete slab, an 8-man tent, and a sand- PURPOSE: Midot Stations PARTICIPATION: None DESIGN PSI: None CONSTRUCTION: 2-21-58/4-10-58 bag revetment. The slab contained a survey monument, and another monument was located about 50 feet away on the high tide line. The sand bag revetment was 6 feet high and waslocated about 400 feet from the slab. STATIONS: 3260.01 - .06 SITE: How USER: SC PURPOSE: Launching Pads for Instrument Rockets Each of these stations consisted of a 450foot-square cleared area containing five 6-inchdiameter steel pipe posts about 3 feet high. Four antenna support posts were equally spaced along the circumference of a 418-faot-diameter circle. The fifth post was located in the center and was Cable trenches were provided from each antenna PARTICIPATION: None the reference point for the other four posts. pole to the center pole. With the relocation of the ABMA Program, this facility was abandoned after completion of construction. STATION: 3241.01 SITE: Nan USER: SC PURPOSE: Telemetry PARTICIPATION: None DESIGN PSI: None CONSTRUCTION: 4-8-58/4-9-58 This station was located on top of the fill over Station 70, Nan, and utilized Room 18 of that station. Two 5-foot-square concrete pedestals were installed about 6 feet high supported on the Station 70 roof siab and rising through the fill over the slab. A conerete pedestal, 1x414 DESIGN PSI: None CONSTRUCTION: 1-22-58/4-10-58 The stabilized area, 70 feet in diameter, contained a working area 36 feet in diameter. Six concrete survey monuments were placed within a fenced area 18x36 feet located at one end of the outer stabilized area. An additional monument was placed 25 feet from the opposite side of the larger area. Within the inner stabilized area was a 10- foot-square, 6-inch-thick concrete slab, thickened at one end to 3 feet in a 5-foot-square area. Two additional slabs, 4x12x2 feet deep, were located adjacent to the other slab. Each of the slabs contained threaded inserts or anchor bolts to tie down the launcher which rested on all three slabs. Three tents were provided in the vicinity for storage, assembly, and administrative space for these stations. With the relocation of the ABMA Program, this facility was abandoned after completion of feet tapered to 3x4-14 feet at the base, was installed between the other two pedestals. Tops construction. supervision. STATIONS: 3261.01 and .02 SITE: How USER: SC PURPOSE: Launching Pads for Instrument Rockets of pedestals contained adjustable mounting plates which were grouted in place under User With the relocation of the ABMA Program, this facility was abandoned after completion of construction. STATION: 3250 SITE: Mike USER: SC PURPOSE: Launching Site for Wind CONSTRUCTION: 1-27-58/4-10-58 Rockets PARTICIPATION: None tions were similar to the 3260 series.. One wa 5 feet square and 2 feet deep; the other two DESIGN PSI: vided. Page 122 Velocity Measuring None PARTICIPATION: None DESIGN PSI: None Except for the size of the slabs, these sta slabs were 3x10x2 feet deep. No tents were pro-