ie
PRIVACY ACT MATERIAL REMOVED
Group 7.4 assisted the Atomic Energy Commission personnel in installing
the filters on the aircraft prior to each mission.
After landing the
drones, all filters and their contents were removed from the aircraft
and handled by Atomic Energy Commission personnel only.
For the secondary purpose of obtaining shock wave intensity, the
following equipment was installed on drone aircraft:
.
ae
Flight analyzer equipment (all drones)
be
Radar altimeter camera (all drones)
ce
Special recording equipment (four drones only)
ad.
Vertical camera, K-17 (all drones)
e.
APS-]0 scope camera (four drones only)
Information on the installation, servicing, and operation of all
equipment used in drone aircraft is contained in Field Order Number One,
Joint Task Force SEVEN.
All data from this equipment was summarized and
forwarded by Air Materiel Command personnel through Colone] “Sine:
to the Atomic Energy Commission Test Director, Task Group 7.1 for review
and clearance.
The removal of this data from the drones following tests
was not allowed to interfere in any way with the primary requirementof
removal of filters, and its removal by Air Materiel Command personnel was
accomplished only in the presence of radiological safety personnel. |
Requirements of the Task Force for assistance in predicting the path
of airborne radioactive residue beyond the vicinity of the test area
originated from a project outside
the jurisdiction of the Task Force
and is not considered a part of Air Force Test Requirements.
PRIVACY ACT MATERIAL RE
MOVED
Section VIII
14
Tee