? 23 at
This £3 the nost common operator aistake.
Insert the
correct diskette then tyne “G (CR).” This will place
the operator back in Alpha 1 COMMAND: mode.
The ooer-
ator then
tries to récall the soectrum again.
Lf the
correct diskette is in the disk drive, chen either the
operator entered che wrong file number or never ra-
corded the file. Check to see if the file exigts on
the diskette by typing “G (CR)” (which places operator
back in the COMMAND: mode) and then FILES (CR):.
Attempc fo KILL or WRITE when on file is open for oucpuc.
This error should not be experienced.
=
7 26 at
Directory inf full. The operacor may encounter this
error if he(she) attempts to store more than 72 files
(spectra) on a diskette. Normally, this error means
that the file which che operator tried to store has not
been stored and must be stored on the new diskette.
? 27 at
dardware error indicated on read or write.
This error
occurs under several cases:
1)
Operator tried ta
:
store data on write srotected diskette.
Place unpro-
tected diskette in dis« unit. Type “G (C2)"“ and try to
scare or recall data again. 2) Operator has inserted
disk with wrong orientation.
Remove diskette and
insert properly. Type “G (CR)” and try to store or
recall daca again. 3) The disk controlled is
malfunctioning (board by aua bin). Operator should
type "G (CR)” and try to store or recall data again.
The controller board occasionally malfunccioning on its
own.
Thera is no real significance to the problem unless it becomes a nuisance.
(For example, one or two
error 27s per 14 hr day is normal). The firse solution
is co open che TP~30 cop and allow nore air flow to the
controller.
If this does not solve the problem, replace controller board.
Note:
An error 27 means no
data was stored or recalled.
? 28 ac
Attempt to read file beyond last character or program
file not auto starting.
Operator should see this error
when reading in PMADJ and CURMOV programs.
7? 29 ac
Hardware error or write or attempe co write beyond the
end of medium. Operacor will see this error if he(she)
cries to store more than 72 daca files on a diskette.
OQperacor will frequentLllegal numerical argument.
Error code just
®MADJ.
Program
in
error
ly see this
indicates that several OMA devices required data trans~
fer simulcaneously and one device received erranc data.
To concinue ctype “G (CR)”.
2? 31 c- ? 35
Error codes noc applicable to current use.