> 39 at
b)
A memory dvard, controller noard, ADC board, are.,
tails and then che device ts addressed will also cause
a ? 09,
Concentrate’repair efforts on the device se-
lected thac gave ? 09,
c)}
A non-destructive and acceptable ? 09 occurs when
you manually zero ADC memory from channel 1281 co 1535
using the zero button and the visual display.
co the program by
?
10 at
Return
typing G (CR).
Core Filled by texc or command line too long. This error occurs frequently due to operator earrorcs.
If the
operator fails co execute step 18 in the ftastruction
maual before loading tn Alpha 1, an error 10 will ocm
cur,
The only way to correce this problem {fs to start
over again ac step 8,
The other occurrence of the error is when memory fails during execucion of Alpha l.
Replace bad memory board.
? ll at
through ?
19
These are standard errors not normally encountered.
If
encountered, they would occur during analysis of data
under the Alpha 1 program.
The problem would aost
likely be thac che specerum being analyzed is composed
of all zeros. This would occur if the operator stored
che spectrum from Inpuc #2 tnstead of Inpuc #1. The
solution is to verify the existence of a valid spec
trum. [f one exists analyze spectrum on second systen.
tf you get che same error code then the specrrunm is
faulty.
Acquire a new one.
If the spectrum {fs correct, reload TPOS I, CURMOV, ALPHAl and standards on
system where error occurred.
? 20 at
Non~wexistene Library funetion.
counter this error.
? 21 ae
Open or store with previously used file name.
This is
a common error and simply means that the operator has
You should never en-
attempced to store 2 separate data files (spectra) with
the same 4 digit [D,numbers.
operator should ty e°6 (CR).
Solucion:
Ist,
the
This will puc the
operator back into the Alpha 1 program act che COMMAND:
location.
The operator can now type “Files” (CR) and
determine when the duplicate number occurred or type
“SAMPLE” or “BACKGROUND” (CR) and attempt co "STORE"
the daca file again, but with a different number.
Open,
store, ask or in command when a file is already
open for input.
Opverator will not see chis error.
Library funccion containing non-existent file name.
This {3 a common error made by all operacors.
The
the diskette in the disk
a)
error code simply means:
the operator never
one or 6)
drive is the wrong
scored a file with che specified number on it.
Solu-
tion:
First check co dececmine if the correct diskeCte has heer inserted in the tape drive.