sn AAS Lamtn Se METER RESPONSE FACTORS . L ENERG beet Chwuplor hy aat survey meter to the spectra calenlated fn tn temis of a eet of Romanhds ing factocs, one for gach enevyy intarval in the epactrin, By sunning over the intere vals and weighting each response factor by the fraction of total airedese in that inturval, a total response factor is obtained, vhus, if ve isa dose beading for radiation of a civen cnerzy and K, is the normalizing facter for that energy, then; KDE = £4D (5.1) wheres fy =: the fraction with the given energy of the total true dose D Hence: Pot =D > f i Solving for Ds D= 1 Dd yak (5.2) Ky The fy may be taken from the dose~eneryy distritutions in Chapter 4 and the ie from Figure 5,1, which is a plot of the response factors found for the earlter model of the aAN/PDR-39a, then called the AN/PUK- T1B (Referenca 10), This is tellaved to be essentially identical in its response to the later models, For the spectrum used in the hefer- ‘ence 16 calculations, the total response factor was found to be 1,9h, This value was used in the dose calculations of that report. For the spectra shown in the Figures l,l to 4.3, the total energy response factors for all energies above 20 kev were found to be as given in Table 5.1, The value of 1,12 for the H+ 5.2 day spectrum of Shot 1 (Figure l.2) is used in the revised dose calculations of this report, since this spectrin represents the best data. 25 ,

Select target paragraph3