ei JOHNSTON ATOLL TITLE F &SNO. Field Maintenance Shop 01056 USER STRUCTURE /FACILITY NO. Subtask A942 BOD SCIENTIFIC STATION NO. None ENGR ($000) FUNDING AGENCY JTF -8 - 280 TC MILCON CRO 7-64 SCIENTIFIC PRE-GO Prior Cost PROC CONST TOTAL FURN 6.9 6.9 Construction costs are included in F&S No. 01004 POST-GO Estimate 2/65 6.9 TOTAL FOD GO+60 1.7 1.7 4.0 1.7 8.6 4.0 PRIOR YEARS ENGINEERING Completed. Drawings: 91-280-A] thru A3 91-280-E1 and E2 PROCUREMENT 91-280-S1 91-276-Cl 91-280-M1 91-276-E4 Completed CONSTRUCTION This facility (completed in 1965) is a 40-ft. square prefabricated steel frame building with a clear inside height of 13-ft. The sides and roof of the building are covered with corrugated asbestos cement and the building is erected ona5-~in. thick concrete floor slab. A 20 x 40-ft. area in the north half of the building has been insulated and has a 12-ft. ceiling height. This enclosure is the Guidance Area and storeroom andis air conditioned to provide a temperature of 70° + 5°. The other half of the building is used as office and shop area and has latrine facilities. A 12x 13-ft. high sliding door is located at each end of the office and shop area. Interior lighting provides 50 foot-candles at bench level. Two (2) foot-candles of exterior lighting is provided on all four sides of the building. Receptacles have been installed to provide 3 kw, two Post-GO trailers. 120 volt, 60 cycle power for Two 400 cycle converters have been furnished by AMICOM for Post-GO installa - tion at this facility. One converter will provide 400 cycle power to the two battery trailers. The second converter will provide 400 cycle power to duplex outlets located in the Guidance area. A 13-ft. high coral berm has been constructed on the south and east sides of the building (see F&S No. 02066). VOLI 1-54