eine.
JOHNSTON ATOLL
F &S NO.
TITLE
01125
Sandia Electronic Laboratory
USER
STRUCTURE/FACILITY NO.
SANDIA
SCIENTIFIC
SCIENTIFIC STATION NO.
693
'
None
BOD
FOD
FUNDING
AGENCY
AEC
($000)
PRE-GO
Prior Cost
TOTAL
ENGR
PROC
CONST
TOTAL
4.2
25.3
29.5
4.2
25.3
29.5
FURN
COMPLETED
DESCRIPTION Building 693 (completed in 1968) is a 20 x 40-ft. concrete block
structure with a reinforced concrete floor and roof; ceiling height is 9-ft. 4-in.
The interior of the building is separated into 3 areas by 6-ft. high partitions.
The areas are a machine shop, electronics laboratory and parts storage area.
Workbenches are provided on two sides of the electronics laboratory, and shelving is provided in the parts storage area. Sandia furnished machine ‘shop equipment is to be installed in the shop area. Two sets of double metal doors, 3 x 6-ft.
8-in. provide access to the shop area and the storage area. This building, replaced Sandia's requirements for Building 315. The building is air conditioned
and dehumidified using existing equipment obtained from Building 315.
The building is provided with 75 kva,
120/208 volt,
60 cycle,
3 phase, power.
Overhead fluorescent lighting is provided in each area of the building. In addition to the duplex receptacles located in the shop and electronics laboratory,
240 volt, 15 amp, 3 phase circuit breakers have been installed in the shop area
for connecting the machine shop equipment.
DRAWINGS:
91-693-Cl
91-693-Ml
91-693-Al and A2
91-693-E1
91-693-S1
VOLI
April 1969