c, Adaptor Flange. Adapter flanges shall be as indica- ted on H & YSheenVe. Skl.05. ad. Liguid Level Controller. The liquid level controll- er shall be Fisher Type co7e direct operated with type 120-1/2 bronze screwed globe body and standard pressure float cage, or approved equal, 6. Steam Trap. Steam traps shall be Yarway Impulse Steam Trap type No. 00, or approved equal of the line size indicated on the drawings, f£. for steam, Strainer: (1) The Steam Strainer shall be Yarway strainer or approved equal of the line size indicated. (2) The Water Strainer shall be Sarcco Type SB, bronze body, screwed, "Y" branch type, or approved equal of the size indicated on the drawings. (3) The Air strainer shall be Crane No. 990-1/2, or approved equal. ge Vibration Bliminators, The vibration eliminators as indicated on the drawing shall be flexible metal hose and fittings. The flexible hose and fittings shall be American Brass Company, type Sl seamless flexible tubing with a single braid, type HMR Heatproof Reattachable Male fitting and HFR Heatproof Reattachable female union, or approved equal, The fittings shall mate the pipe sizes shown on the drawings. h, Liquid level gage shall be Jerguson Gage Valve Company No. 215=R-5 gage, or approved equal, of pipe size indicated on the drawings. 1. Water blender temperature controller shall be a double-ported, fully balanced pisfon type. .The temperature control range shall be between .c’ F to 2009 F, and shall be set at temperature indicated on the drawings. The water blender shall be designed for a maximum working pressure of 150-pound per square inch. The water blender temperature controller shall be Sarcco type EE or approved equal. Water blender shall be located as indicated on the drawings. je Condensate Pumping Unit. The condensate pumping unit shall be Duplex Automatic Electric condensation pumping unit complete with two Type N pumps with electric motors; one (1) Armco rust resisting iron receiver; two (2) heat switches and two (2) gate valves. All shall be mounted on 20),