ANNEX T - OPERATIONSORDER NO, 2-54 CIC_PLOTTER TELLER INSTRUCTIONS STATUS CONTROLLER: The Status Controller is the Senior Controller's assistant and will supervise operational control of the two (2) HF point- to-point operators, HF air.to-ground operator, and the VHF relay operator to insure that positions one through six are properly displayed on the aircraft status boards. He will receive positions one (2) and six (6) from DIRTY FACE over one of the HF point-to-point circuits or through the VHF relay circuit and will give positions two (2) through five (5) to DIRTY FACE, Every effort will be made to keep all circuits open for operations with the clearest circuit being used to interchange information between DIRTY FACE and BOUNDARY TARE, All communication difficulties will be reported to the Electronics Officer for corrective action, The HF air. to~ground circuit will be continually monitored and when VHF contact can- not be made with an aircraft the air-ground circuit will be used. An additional selector switch is provided for all circuits for coordination by the Senior Controller in the CIC, A atatus log (Attachment 1) will be kept up to date by the status controller to insure positions one (1) and six (6) are received from the AOC and properly displayed on the CIC status boards and that positions two (2) through five‘ (5) are told to the AOC, Positions will be told between the AOC and CIC by giving call sign, position and time (PRWTER 2, positions three, one zero two zero). Aircraft in emergency and assisting aircraft or ships will take priority over other aircraft plots to insure accurate positions. The Status Controller will be directly responsible to tre Senior Controller. TELLERS: The tellers will provide their plotter with a position on each aircraft at least, each three minutes, In case an aircraft is in an emergency, the frequency of plots will be increased to depict a constant heading and position, The teller will give the plotter call sign for aircraft, bearing and range. (WILSON 1 zero two five at forty). The tellers and plotters will use head and chest sets for reporting on a direct circuit. The teller for scopes four, five and six will give positions two through five to the Sampler Status Clerk and three minutes positions on CASSIDY 1, WILSON 1, STABLE 1 and 2, FLOYD 1 and 2, ELAINE 1 and 2, and TIGER air- craft to Plotter #2, The teller for scopes two, three and seven will give positions two through five to the Effects Status Clerk, and three minute positions on PEWTER 1, 2 and 3, HARDTIME 1 and VIKING aircraft to Plotter #1. The tellers will be responsible to see that the plotted positions are maintained on the operation board each three minutes on all aircraft. He may read positions direct from controllers scope or obtain call sign, range and bearing from thé seope controllers, to the side of the controller, His position will be behind and After H-hour and scope controller #2, 3, and 7 release control of assigned aircraft to DIRTY FACE their teller will assist the teller for controllers #4, 5 and 6 for duration of mission. HF AND VEF RELAY OPERATIONS: The HF point-to-point monitor-tellers will make every effort, through the Electronics Officer, to keep these circuits operational to the AOC, The primary purpose of these circuits will be to pass aircraft positions and maintain coordination on operational matters between the CIC and the AOC. The VHF relay will be a hack up for the HF point-to-point circuits and provide an additional means of communiexntions between the AOC and CIC, TASK GROUP 7.4 OPRS ORDER NO. 2-54 ANNEX T, APNDX 2 The HF air-ground monitor—teller will