Pe KAUAI, AEC-TRE F&S NO. 12012 USER SUPPORT TITLE Maintenance and Service Building STRUCTURE FACILITY NO. Sandia SCIENTIFIC STATION NO. None Bop None FUNDING AGENCY ($000) ENGR AEC PRE-GO FY-69 FY-71 6.4 TOTAL 6.4 PROC CONST TOTAL 95.1 6.4 95.1 95.1 101.5 FOD6 -30 -71 FURN FY 1969 ENGINEERING In progress. Preliminary drawings issued for approval are: JS 97-032-C2 JS 97-032-A7 thru AJ JS 97-032-S3 JS 97-032-M3 JS 97-032-E3 and E4 FY 1971 ENGINEERING To be completed in FY 1969. PROCUREMENT To be accomplished. CONSTRUCTION A steel framed building, 30 x 44 x 14-ft. high, erected ona concrete slab, will contain a vehicle servicing area and a maintenance shop. The 27 x 30-ft. vehicle servicing area will be equipped with battery charging facilities, sinks, storage facilities for grease and spare parts, and a com- pressed air system. A 12 x 18-ft. roll up door will provide access to the vehicle servicing area. The maintenance shop, 17 x 30-ft. will have gypsum board walls and ceiling, will be insulated, air conditioned and dehumidified. Interior and exterior lighting will be provided. Convenience outlets (110-volt) will be distributed throughout the interior. Power supplied from a distribution panel at the trailer dock will be 15 kw 120/208 volt, 60 cycle, 3 phase. A 2 post hydraulic lift will be installed on an extension of the building's concrete floor slab outside the south end of the vehicle servicing area. A gasoline pump and an underground storage tank will be located south of the building. The building will be supplied with a fresh waterline. 12-7 ee " VOLI April 1969