KAUAI AEC-TRE F &S NO. 11013 USER SANDIA SCIENTIFIC TITLE Rocket Assembly Buildings STRUCTURE. FACILITY NO. Existing: 656 and 66) Future: Unnumbered FUNDING ($000) AGENCY AEC eee ENGR SCIENTIFIC STATION NO. BoD None FOO GO+120 PROC CONST TOTAL PRE-GO Prior Cost FY 71 6.3 12,0 159.7 114.0 * 166.0 126.0 TOTAL 18,3 273.7 292.0 FURN PRIOR YEARS ENGINEERING Drawings: Completed, F 97-656-Al and A2 F F JS JS 97-656-S1 and S2 97-656-E1 97-3224C -A2@ and A3 97-3224C -E6 PROCUREMENT JS 97-656-Al JS JS JS JS 97-656-El 97-656-M1l 97-061-Al 97-6601-E} F 97-661-Al and A2 F 97-661-E1l and E2 F 97-661-S1] and S2 F 97-661-Ml 97-3224B-S1 Completed. CONSTRUCTION Two (2) Rocket Assembly Buildings (completed in 1965) are 36 x 38-ft. in plan with corrugated aluminum siding and roofing. The roofing rests on wood purlins supported by intermediate steel trusses and wood end walls. The trusses bear on timber columns tied into the wall framing. The high bay assembly area is 30 x 36-it. 6-in. with a clear height of 12-ft. o-in. An 8 x 36-ft. lean-to on the north side of the building has a clear height of 8-ft. andis divided into an 8 x 8-ft. workroom and an 8 x 28-ft. office storage area. The floor is a reinforced concrete slab which has been extended 20-ft. out on the east and west sides of the building to form exterior flared loading aprons 30-ft. wide. The slab is designed to sustain a load of 2000 psi. The insulated roofs and walls are paneled with gypsum wallboard. bay area has four 8 x 8-ft. vehicle doorways. The high One 2 ton and one 3 ton chain hoist traverse the width of the high bay area, one on each of two parallel monorails 12-ft. apart. “Includes engineering's estimated distribution of cost gf $106.0Kfroml. D. No. 13921. 11-9 VOL Il