Pe
KAUAI, AEC-TRE
F&S NO.
12012
USER
SUPPORT
TITLE
Maintenance and Service Building
STRUCTURE FACILITY NO.
Sandia
SCIENTIFIC STATION NO.
None
Bop
None
FUNDING
AGENCY
($000)
ENGR
AEC
PRE-GO
FY-69
FY-71
6.4
TOTAL
6.4
PROC
CONST
TOTAL
95.1
6.4
95.1
95.1
101.5
FOD6 -30 -71
FURN
FY 1969
ENGINEERING
In progress.
Preliminary drawings issued for approval are:
JS 97-032-C2
JS 97-032-A7 thru AJ
JS 97-032-S3
JS 97-032-M3
JS 97-032-E3 and E4
FY 1971
ENGINEERING
To be completed in FY 1969.
PROCUREMENT
To be accomplished.
CONSTRUCTION A steel framed building, 30 x 44 x 14-ft. high, erected ona
concrete slab, will contain a vehicle servicing area and a maintenance shop.
The 27 x 30-ft. vehicle servicing area will be equipped with battery charging
facilities, sinks, storage facilities for grease and spare parts, and a com-
pressed air system.
A 12 x 18-ft. roll up door will provide access to the
vehicle servicing area.
The maintenance shop, 17 x 30-ft. will have gypsum board walls and ceiling,
will be insulated, air conditioned and dehumidified. Interior and exterior
lighting will be provided. Convenience outlets (110-volt) will be distributed
throughout the interior. Power supplied from a distribution panel at the
trailer dock will be 15 kw 120/208 volt, 60 cycle, 3 phase.
A 2 post hydraulic lift will be installed on an extension of the building's concrete
floor slab outside the south end of the vehicle servicing area. A gasoline pump
and an underground storage tank will be located south of the building. The building will be supplied with a fresh waterline.
12-7
ee "
VOLI
April 1969